Shop By Product Matching "MSD"


Showing 1 - 10 of 90 products
Image
SKU
Product
Rating
Price

MSD
  • Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 CARB E.O. D-40-38~If Replacing A GM HEI- A Blaster SS Coil & Coil Wire Are Required
  • Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
  • Ready-To-Run Distributor
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
  • Features:
    • Simple and clean three wire installation
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
    • Vacuum advance canister for improved economy (can be locked out)
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Chevrolet Caprice V 7439 8 Cyl 7.4L 454

MSD
  • Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39
  • Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
  • Ready-To-Run Distributor
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
  • Features:
    • Simple and clean three wire installation
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
    • Vacuum advance canister for improved economy (can be locked out)
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - GMC Jimmy V 7439 8 Cyl 7.4L 454

MSD
  • Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 If Replacing A GM HEI- A Blaster SS Coil and Coil Wire Are Required~CARB E.O. D-40-38
  • Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
  • Ready-To-Run Distributor
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
  • Features:
    • Simple and clean three wire installation
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
    • Vacuum advance canister for improved economy (can be locked out)
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Chevrolet Blazer V 7441 8 Cyl 7.4L 454

MSD
  • Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39
  • Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
  • Ready-To-Run Distributor
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
  • Features:
    • Simple and clean three wire installation
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
    • Vacuum advance canister for improved economy (can be locked out)
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1973 - GMC Sprint V - 8 Cyl 5.7L L 350

MSD
  • High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
  • Blaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • Turns Ratio: 100:1
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
    • Available In Red And Black
  • Our famous red canister coil! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Buick Apollo L - 6 Cyl 4.1L 250

MSD
  • High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37 0.7 OHMs Primary Resistance/4.5K OHMs Secondary Resistance
  • Blaster 2 Ignition Coil; High Performance; w/MSD 6 Series; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • Turns Ratio: 100:1
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
    • Available In Red And Black
  • Our famous red canister coil! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Buick Electra V 7456 8 Cyl 7.5L 455

MSD
  • Includes Ballast Resistor For Stock Applications; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Blaster 2 Ignition Coil; Includes Ballast Resistor For Stock Applications; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • Turns Ratio: 100:1
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for stock points or electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
  • This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Ford Ranchero L 4097 6 Cyl 4.1L 250

MSD
  • Includes Ballast Resistor For Stock Applications; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;CARB E.O. D-40-37
  • Blaster 2 Ignition Coil; Includes Ballast Resistor For Stock Applications; 8 mH Inductance; 45000 Max Volts; 140mA Peak Current; 350 uS Spark Duration; 100:1 Turns Ratio; Red;
  • Blaster 2 Ignition Coil
  • Product Attributes:
    • Spark Duration: 350 Us
    • Turns Ratio: 100:1
    • Inductance: 8 Mh
    • Maximum Voltage: 45000
    • Peak Current: 140 Ma
    • Primary Resistance: .700 Ohms
    • Secondary Resistance: 4.5k Ohms
  • Features:
    • Improved output coil for stock points or electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
    • 100:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Metal Canister Is Filled w/Premium Grade Oil For Cooling
    • CARB E.O. Approved
  • This Blaster Coil is supplied with a ballast resistor. If your application uses a points distributor, the ballast must be used. Late-model electronic ignitions or an MSD Ignition do not require the ballast. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister.

Additional Fitment Information:
Vehicle Block CC Engine CID
1973 - Ford Mustang V - 8 Cyl 5.0L 302

MSD
  • Steel Gear For Factory Roller Cam; w/Module;O.E.M. Replacement Part
  • Pro-Billet Distributor; Steel Gear For Factory Roller Cam; w/Module;
  • Pro-Billet Distributor
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • WARNING CA Proposition 65: Yes
    • Engine Make/Size: Ford 351w
  • Features:
    • Drop in billet replacement for late model Ford TFI 5.8L dist.
    • Supplied w/steel gear to work w/factory roller camshafts
    • Factory style ignition module connector accepts factory wiring
    • CNC machined billet aluminum housing and billet aluminum base
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Supplied w/Late Model Distributor Cap And Rotor
    • Legal to install in all 50 states
  • When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state-of-theart Computer Numerical Control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire rpm range of your engine. The shaft is also QPQ-coated for friction reduction and corrosion resistance. The Pro-Billet Distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a high-quality cap with brass terminals for full spark delivery, heavy-duty rotor and a special gear to work with the factory camshafts.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1973 - Ford LTD V 5753 8 Cyl 5.8L Windsor 351

MSD
  • Steel Gear For Factory Roller Cam; w/Module;O.E.M. Replacement Part
  • Pro-Billet Distributor; Steel Gear For Factory Roller Cam; w/Module;
  • Pro-Billet Distributor
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • WARNING CA Proposition 65: Yes
    • Engine Make/Size: Ford 351w
  • Features:
    • Drop in billet replacement for late model Ford TFI 5.8L dist.
    • Supplied w/steel gear to work w/factory roller camshafts
    • Factory style ignition module connector accepts factory wiring
    • CNC machined billet aluminum housing and billet aluminum base
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Supplied w/Late Model Distributor Cap And Rotor
    • Legal to install in all 50 states
  • When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state-of-theart Computer Numerical Control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire rpm range of your engine. The shaft is also QPQ-coated for friction reduction and corrosion resistance. The Pro-Billet Distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a high-quality cap with brass terminals for full spark delivery, heavy-duty rotor and a special gear to work with the factory camshafts.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1973 - Ford LTD V 5753 8 Cyl 5.8L Windsor 351
Showing 1 - 10 of 90 products

Loading...