Image
Product
Price
- BD-Built Performance Duramax LB7 CR Injector Chevy 2001-2004 Stage 2 43%/90hp
- LB7 engine; Stage 2; 90 hp Increase;
- BD-Built Performance Duramax LB7 CR Injector Chevy 2001-2004 - Stage 2 - 43% / 90hp
- Performance Injector
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 43% (90hp)
- Engine: Duramax 6.6l 01-04 Lb7
- Suggested Product: 1050141
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 43% over - approximately 90hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-43%, which equates to approximately 60hp-90hp.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- BrakeLoc - 94-03 Ford 7.3L Manual Transmission
- Manual Trans;
- BrakeLoc - 1994-2003 Ford 7.3L Manual Transmission
- Exhaust BrakeLoc
- Product Attributes:
- Category: Electronic Exhaust Brakes
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Cost effective solution of engine retarding for towing with the Ford PowerStroke by utilizing the OEM Exhaust Back Pressure (EBP) valve
- Commands the EBP valve to activate to act as an engine brake
- For more efficient retarding use or medium to heavy loads use BD Exhaust Brake 2033143, 2023144, 1037143 or 1027144
- Make the Most of Your Power Stroke's exhaust backpressure valve! BD's BrakeLoc connects to the EBPV control wire, turning the factory valve into an electronically-controlled exhaust brake. Note that, because the EBPV is activated hydraulically, there is typically a 2-3 second delay between the time the valve is actuated and engine retarding occurs. While the BrakeLoc is an economical alternative to an exhaust brake, it is NOT intended as a substitute. For quicker, more effective braking, we recommend a BD exhaust brake system, which utilizes our Variable Orifice Technology, and won't stick like the stock EPB valve can.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Ford F-350 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- BD Dodge Steering Box Stabilizer 2wd Ram 1994-2002 2500/3500 & 1994-2001 1500
- 2wd;
- BD Dodge Steering Box Stabilizer (SBS) 2wd Ram 1994-2002 2500/3500 & 1994-2001 1500
- Steer Box Stabilizer
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1061501
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- The Wobble Stopper
- Eliminates steering wander and wobble caused by excessive shaft play in the steering box
- Designed for easy, bolt-in installation in about an hour
- Virtually eliminates frame flex at the steering box mounting point
- More positive steering feel
- Silver vein powder coated for corrosion resistance
- Greaseable, high-quality bearing for reliable operation
- High-strength mounting hardware
- Gas & Diesel
- BD's Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of late-model Dodge trucks. Designed for easy, bolt-in installation in about an hour, the SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel. The BD SBS is powder coated for corrosion resistance, and features a greaseable, high-quality bearing for reliable operation. The SBS comes complete with high-strength mounting hardware and instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Dodge Ram 2500 | V | 7990 | 10 Cyl 8.0L | 488 |
- BD TIE ROD KIT CHEVY/GM 2001-2010 1500HD/2500 HD/3500HD Silverado/Sierra
- BD TIE ROD KIT CHEVY/GM 2001-2003 & 2005-2007 1500HD & 2001-2010 2500 HD/3500HD Silverado / Sierra
- Tie Rod Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Tie Rod shaft and inner ball joint is 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the 'band-aide' Tie Rod Sleeves.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - GMC Sierra 1500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- STEERING UPGRADE KIT CHEVY/GM DURAMAX 1500HD & 2500HD/3500HD 2001-2010
- Comes with Pitman Arm;
- STEERING UPGRADE KIT - CHEVY/GM DURAMAX 1500HD 2001-2003 & 2005-2007 & 2500 HD/3500HD SILVERADO / SIERRA 2001-2010 WITH PITMAN/IDLER
- Steering Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Forged I-Beam Centerlink 30% stronger than OEM for less deflection
- Forged Centerlink retains factory geometry for accurate steering
- Tie rods 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Sway bar end links 1-inch longer than factory to accommodate leveling kits
- Durable polyurethane sway bar end link bushings shaped for articulation and durability
- 1-inch longer Sway bar end links prevent damage to Tie Rod Seals/Boots
- Greaseable pitman arm and idler arm
- Compatible with OEM components
- Other upgrade kit designs change the geometry of the steering which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by preventing catastrophic repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Injector Connector Feed Tubes Kit - Dodge 1998.5-2002 5.9L ISB
- Injector Connector Feed Tubes Kit - Dodge 1998.5-2002 5.9L Cummins 24-Valve ISB
- ISB Injector Connector Tube Kit
- Product Attributes:
- Category: Stock Injectors
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1050215
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Required for first time replacement of injectors for engines with a serial numbers less then 56462598
- Suggested on multiple injector swaps
- Required for first time replacement of injectors for engines with a serial numbers less then 56462598; Suggested on multiple injector swaps
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD HI5 12-Bolt Flexplate - Dodge 1994-2007 47RE/48RE
- Fits any OEM or aftermarket torque converter; Meets SFI 29.3 Approval;
- BD HI5 12-Bolt Flexplate - Dodge RAM 1994-2007 47RE/48RE
- Flex Plate 12-Bolt
- Product Attributes:
- Category: Torque Converters
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1041209
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 12 bolt holes to help prevent shearing
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- Direct, bolt-in replacement for the stock unit
- BD Diamond Bite Shims included
- Meets SFI 29.3 Approval!
- Reliably handle up to 3,500 lb.-ft of torque
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Under high torque applications, the bolts between the torque converter and flex plate can slip. Eliminate this failure with twice the clamping load. The BD 12-bolt flexplate, which includes BD's Diamond Bite Shims, maximize torque holding capacity. The BD Flex Plate is proven to handle up to 3500 lb.-ft of torque. The matching 12-bolt Hi5 torque converter is required to utilize all 12 bolts. A standard 6-bolt torque converters can still be installed using only 6 bolts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- BD 7.3L Powerstroke Flexplate 4R100/E4OD Ford 1994-2003
- 4R100/E4OD Transmission;
- BD 7.3L Powerstroke Flexplate 4R100/E4OD Ford 1994-2003 Pick-Up/SUV/Van
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1061716
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 1.5 times thicker than stock
- Balanced to OE specifications
- One piece billet machined with integrated counterweight
- Manufactured from Quench and Tempered Steel with a Yield strength of 100,000psi
- Not affected by hydrogen embrittlement caused by zinc plating, which can drastically reduce strength
- Black oxide coated
- Heat treated and hardened ring gear to last longer
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is CNC machined 1.5x thicker out of quench and tempered 100ksi steel. In-house machining incorporates integrated counterweights which are then balanced to better than OE specifications. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
- Up-Pipes Kit Ford 7.3L PowerStroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- Includes Pipes; Turbo Y Adapter; Donut Gaskets And Hardware;
- Up-Pipes Kit Ford 7.3L Power Stroke 1999.5-2003 F-250 / F-350 / Excursion / E-350
- UpPipes
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1057025
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Replaces factory exhaust feed system which is prone to leakage
- Prevents loss of turbo drive pressure and increased EGT's
- Crush donuts replaced with stainless steel gaskets for extended sealing life
- Maximizes transfer of heat energy to the turbo
- Less restrictive, internally shielded expansion bellows
- Reduces the chance for piping burn out
- High-silicon ductile iron Y-adapter
- 304L 2-inch stainless tubing prevents loss of heat energy and will not corrode like aluminized steel or 409 stainless
- Larger diameter 304 stainless steel Up-Pipes includes internally shielded stainless steel expansion bellows
- Replaces the factory exhaust up-pipes (exhaust manifold to the turbo) which are prone to leakage due to the deterioration. BD up-pipes are designed to minimize restriction to the turbo utilizing internally shielded expansion bellows .The turbo Y-adapter is made from high-silicon ductile iron. The BD up-pipes are a durable, longer-life replacement for this common problem and are perfect as an upgrade while performing other engine or transmission repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Ford E-350 Econoline Club Wagon | V | - | 8 Cyl 7.3L | 445 |
Showing 1 - 10 of 213 products
Loading...