Image
Product
Price
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019 F250/F350/F450/F550
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1057932
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD Chevy 2 Low UnLoc - 4wd 2015-2019 2500-3500 / 2014-2019 1500 / 2015-2020 SUV
- 4wd;
- BD Chevy 2 Low UnLoc - 2015-2019 2500-3500 4wd / 2014-2019 1500 4wd / 2015-2020 SUV 4wd
- 2 Low UnLoc
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1036627
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Installation is simple, the kit plugs in under the hood
- No wire cutting or splicing
- Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
- With this kit installed, the front wheels will NOT be driven through the transfer case
- Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only
- Vehicle maneuverability is reduced while in 4WD. When the 2Low Unloc is turned on, you disable the front wheel drive mechanism allowing for full torque to be available to the rear wheels only. The front wheels will NOT be driven, delivering normal 2WD maneuverability while in low range! This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 5328 | 8 Cyl 5.3L | 325 |
- Track Bar Kit Ford F-250/F-350 4wd 2017-2022 & F-450/F-550 4wd/2wd 2017-2022
- 4wd;
- Track Bar Kit Ford SuperDuty F-250/F-350 4wd 2017-2022 & F-450/F-550 4wd/2wd 2017-2022
- Track Bar
- Product Attributes:
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1303104-kt
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Long lasting, easily serviceable polyurethane bushing
- No welded joints
- OEM Ball joint comes pre-installed
- Drive straighter with less wander and more positive steering feel
- Perfect solution for steering stability
- Helps resolve "Death Wobble
- Gas & Diesel
- Fully Adjustable
- No need to remove bar from the truck to adjust
- Adjustable to accommodate up to a 6-inch lift
- Made from high strength, heat treated forged components
- High quality black Cerakote finish, which resists corrosion and doesn't flake off like powder coat when hit by road debris
- BD's fully Adjustable Track Bar will fit stock trucks and accommodate those lifted up to 6-inches, plus, there is no need to remove the bar from the truck to adjust. The black Cerakote finished Adjustable Track Bar will allow for correct axle alignment on lifted trucks so they drive straighter with less wander and more positive steering feel. Installation kit comes with long lasting, easily serviceable polyurethane bushing. BD's Adjustable Track Bar is the perfect solution for steering stability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- BD 6.7L Powerstroke 6R140 Flexplate - Ford 2011-2019 w/6-bolt converter
- 6R140 transmission;
- BD 6.7L Powerstroke 6R140 Flexplate - Ford 2011-2019 with6-bolt converter
- Flex-Plate
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Balanced to OE specifications
- One piece billet machined with integrated counterweight
- Manufactured from Quench and Tempered Steel with a Yield strength of 100,000psi
- Black oxide coated
- Heat treated and hardened ring gear to last longer
- Fits OEM and aftermarket 6-bolt torque converters
- BD's 6r140 Flex Plate is CNC machined out of 1.5x thicker than stock quench and tempered 100,000psi steel. In-house machining incorporates an integrated counterweight which is then balanced to tighter tolerances than OE specifications. Black Oxide coated to resist corrosion. These units will fit any OEM or aftermarket torque converter and affordable enough to upgrade during a converter or transmission swap. The BD Flex Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge 2007.5-2018
- S363SXE/76 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S363sxe/76 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Exhaust Manifold Ram 3500/4500/5500 Cab & Chassis 6.7L Cummins 2013-2018
- Cab and Chassis;
- BD Exhaust Manifold Ram 3500/4500/5500 Cab & Chassis 6.7L Cummins 2013-2018 HE351 Turbo Mount
- Exhaust Manifold
- Product Attributes:
- Turbo Mount Flange: He351 (oem)
- Pick-up or Cab&Chassis: Cab-chassis 2013-2018
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045779
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE300VG Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Gasket matched ports with smooth internal geometry to maintain optimal performance and efficiency
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- Fully EGR compatible
- BD's pulse manifold for the RAM Cab & Chassis vehicles is made from thicker-walled high-silicon ductile iron that is designed to resist thermal warping, plus withstand extreme temperatures and vibration. Engineered with state of the art modelling software to optimize pulse flow for optimal turbo spool and performance. Precision slip joint allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge 2007.5-2018
- S369SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S369SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S369sxe/80 1.00 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 69.00mm 2.72in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 98 Lb./min
- Approximate rated 700hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Power Stroke Screamer Turbo - Ford 2017-2019 F250/F350 /F450/F550
- BD 6.7L Power Stroke Screamer Turbo - Ford 2017-2019 F250/F350/F450/F550 Pick-up & Cab-Chassis
- Screamer Turbo
- Product Attributes:
- Category: Performance Kits
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1043008
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 64.0mm Billet compressor wheel
- VSR high speed balanced
- Built using a brand new Garrett Turbo
- Custom mixed flow turbine (MFT) wheel with a large 65mm exducer
- Drop-in stock-appearing turbo
- Increased airflow without compromising on low end drivability
- Large 65mm 'mixed flow' turbine wheel increases turbine flow and retains efficiency
- More boost, lower drive pressure, and lower EGT's
- No tuning required and does not set engine codes
- Up to 81lb/min of airflow
- The drop-in, stock-appearing Screamer turbo for the later model Ford 6.7L Powerstroke utilizes modern turbo technology that delivers increased airflow without compromising on low end response. Boost pressure can be increased to improve horsepower potential. The Powerstroke Screamer turbo works with any "box" tuner and further improvements achieved with custom tuning. Drop-in turbo reuses the factory 2017-2019 turbo pedestal.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024
- L5P engine;
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024 2500HD / 3500HD & 2019-2023 4500HD / 5500HD / 6500HD
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Automatically resets after shut down
- Only the switch needs a tool to install
- Easily removed for truck lease returns
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 188 products
Loading...