2021 Ford ICON Vehicle Dynamics Parts
Choose a Model for your 2021 Ford
Image
Product
Price
- 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR
- Used with 3 (in) to 6 (in) Lift Also Requires Part Number 93500 and Number 61721E, 67710EP or 67720EP
- ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
- 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color:
- Gray
- Grey
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable:
- Electronically
- Yes
- Bore Diameter: 2.25
- Service Parts:
- 191015 - 10" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257344 - 7/8 Shaft 18.85 Oal, 14.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford F-250 Super Duty | Rear | Limited |
- 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR
- Also Requires Part Number 93500 and Number 61721E, 67810EP, or 67820EP Requires iOS operated device to run ICON Intelligent Control App with 3 (in) - 6 (in) Suspension Lift
- ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
- 17-24 FSD 0-3" REAR 2.5 VS PB CDEV PAIR
- Product Attributes:
- AAP_UDA_22: 1
- Cylinder Color: Gray
- Grade Type: Performance
- Mounting Hardware Included: Yes
- AAP_UDA_4: 55
- Damping Type: Oil
- Adjustable Damping: Yes
- Adjustable: Yes
- Bore Diameter: 2.25
- Service Parts:
- 191015 - 10" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257344 - 7/8 Shaft 18.85 Oal, 14.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Cylinder Diameter: 2.5
- External Reservoir: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2021 - Ford F-350 Super Duty | Rear | Platinum | 4WD |
- Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package
- For those who would like to retain the functionality of the Bronco crash bars but still clear 35" tires, or for those who would like to add that functionality to Sasquatch-equipped Broncos, ICON offers our new High Clearance Crash Bar Kit.
- 21-23 BRONCO CRASH BARS
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Mounting Hardware Included: Yes
- Material Thickness: 0.188
- Type: High Clearance
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Retains safety of OE crash bars while providing clearance for 35” x 12.50” tires
- Rugged, multi-layer 3/16” steel construction
- CNC laser cut and brake-formed
- Easy do-it-yourself installation
- Durable multi-stage semi-gloss black powder coat finish
- ICON Vehicle Dynamics Limited Lifetime Warranty
- The factory crash bars are standard equipment on all non-Sasquatch equipped Broncos. To take full advantage of 35" or larger tires these crash bars must be removed, if present. For those who would like to retain the functionality of the crash bars but still clear 35" tires, or for those who would like to add that functionality to Sasquatch-equipped Broncos, ICON offers our new High Clearance Crash Bar Kit. These crash bars are made with three layers of beefy 3/16" thick plate steel, CNC laser cut, brake-formed and professionally fixture-welded for an easy, secure fit into the factory crash bar mounts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Ford Bronco | Big Bend |
- Use Up To 35 (in) x 12.50 (in) Tires with Sasquatch Package Requires OE Crash Bar Mounting Bolts from Non-Sasquatch Equipped Bronco or Equivalent Metric Bolts
- For those who would like to retain the functionality of the Bronco crash bars but still clear 35" tires, or for those who would like to add that functionality to Sasquatch-equipped Broncos, ICON offers our new High Clearance Crash Bar Kit.
- 21-23 BRONCO CRASH BARS
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Mounting Hardware Included: Yes
- Material Thickness: 0.188
- Type: High Clearance
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Retains safety of OE crash bars while providing clearance for 35” x 12.50” tires
- Rugged, multi-layer 3/16” steel construction
- CNC laser cut and brake-formed
- Easy do-it-yourself installation
- Durable multi-stage semi-gloss black powder coat finish
- ICON Vehicle Dynamics Limited Lifetime Warranty
- The factory crash bars are standard equipment on all non-Sasquatch equipped Broncos. To take full advantage of 35" or larger tires these crash bars must be removed, if present. For those who would like to retain the functionality of the crash bars but still clear 35" tires, or for those who would like to add that functionality to Sasquatch-equipped Broncos, ICON offers our new High Clearance Crash Bar Kit. These crash bars are made with three layers of beefy 3/16" thick plate steel, CNC laser cut, brake-formed and professionally fixture-welded for an easy, secure fit into the factory crash bar mounts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Ford Bronco | Badlands |
- with ICON Rear Coilover Kit Part Number 48610, 48710, 48710C, or 48710E
- The ICON Vehicle Dynamics 2021-2023 Bronco Coil Seat Kit is used when upgrading an existing pair of ICON 2.5 Series Bronco rear coilovers equipped with spring part number 148350 with the ICON Heavy Rate Rear Coil Kit.
- 21-23 BRONCO REAR COIL CUP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Material: Aluminium
- California Prop 65 Warning: Yes
-
Features:
- Direct fit for ICON 2.5 Series Bronco rear coilovers
- CNC machined 6061 T6 aluminum construction
- Black anodized for sleek look and corrosion resistance
- The ICON Vehicle Dynamics 2021-2023 Bronco Coil Seat Kit is used when upgrading an existing pair of ICON 2.5 Series Bronco rear coilovers equipped with spring part number 148350 with the ICON Heavy Rate Rear Coil Kit. Over time different revisions of the ICON triple rate rear Bronco coil have required coil sets of varying heights to achieve proper ride height. This precision CNC machined, anodized aluminum coil cup kit is the correct height to be used with the ICON Heavy Rate Rear Coils to achieve the ICON recommended rear ride height.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Bronco | Rear | First Edition |
- with Sasquatch Package Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit Raises Rear 0 (in) - 1.75 (in) Up to 37 (in) Tire with Minor Fender Trimming Raises Front 0 (in) - 2 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- ICON suspension systems lift your Ford Bronco while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 21-23 BRONCO HOSS 2.0 PKG 0-2" LIFT STAGE 2 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Minimum Lift Rear: 0
- Maximum Lift Front: 2
- Maximum Lift Rear: 1.75
- Minimum Lift Front: 0
- Shocks Included: Yes
- California Prop 65 Warning: Yes
-
Features:
- Vehicle specific design for 2021-2023 Ford Bronco with HOSS 2.0 Suspension Package
- Vehicle specific tuned shocks for superior shock damping and vehicle control
- Kit includes full set of (4) 2.5 Aluminum Series EXP Shocks with Internal Reservoirs
- Adjustable ride heights from 0-2” of front lift and 0-1.75" of rear lift over stock with the use of snap rings
- Utilizes factory coils and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shafts
- One-piece, impact extruded, hard anodized aluminum cylinders offer excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearings for extended longevity and minimal deflection
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- 100% Bolt-on - no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
- HOSS 2.0 is Ford's upgraded suspension system for Broncos of the Base, Big Bend, Outer Banks and Black Diamond trim levels WITH the optional Sasquatch package, and it is also standard on Badlands, Wildtrak, First Edition and Everglades. HOSS 2.0 is most easily identified by the YELLOW shock bodies of the OE shocks.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Bronco | Front and Rear | Outer Banks |
- without Sasquatch Package with 2 (in) - 4 (in) Suspension Lift Use Up To 37 (in) x 12.50 (in) Tires ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON tubular UCAs feature 1026 DOM tube construction, polyurethane, and ICON’s rebuildable Delta Joint PRO, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 21-23 BRONCO TUBULAR UCalifornia DJ PRO KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50"
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
- (with Sasquatch Package): Icon Alloys - 17x8.5" W/ 4.75" Backspace / 0mm Offset
- (with Sasquatch Package): Icon Alloys - 18x9" W/ 5.00" Backspace / 0mm Offset
- (with Sasquatch Package): Icon Alloys - 20x9" W/ 5.00" Backspace / 0mm Offset
- (without Sasquatch Package): Icon Alloys - 17x8.5" W/ 5.75" Backspace / 25mm Offset
- (without Sasquatch Package): Icon Alloys - 18x9" W/ 6.00" Backspace / 25mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- California Prop 65 Warning: Yes
- Control Arm Material: Dom Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- These tubular steel upper control arms free up your 2021-2023 Ford Bronco's front suspension movement to allow maximum travel for performance shocks and coilovers at an easier price point compared to our range-topping billet components. Additional caster is built in to correct geometry to allow for better front-end alignment on lifted Broncos. The all-new Delta Joint PRO provides a host of durability and performance improvements compared to our standard Delta Joints, including up to 90° of free articulation to maximize suspension travel without bind. It’s also larger and fully rebuildable. The Delta Joint PRO’s grease fitting is protected by an anodized billet aluminum dust cap, included with the kit. Serviceable Heavy Duty Dual Stage bushings at the frame pivots are greaseable and rebuildable, and fit into precision machined bushing housings to ensure a responsive driving experience. ICON Tubular Upper Control Arms are constructed of heavy-wall DOM tubing, CNC formed and fixture welded before receiving our multi-stage black powder coat finish. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Bronco | Front Upper | Big Bend |
- with 3 (in) Maximum Lift Rear
- ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 99-24 FSD 0-3" REAR 2.5 VS IR PAIR
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Cylinder Color: Gray
- Upper Mount Type: Eyelet
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Damping: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Cylinder Diameter: 2.5
- External Reservoir: No
- Bore Diameter: 2.25
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257340 - 7/8 Shaft 14.25 Oal, 10.00 Travel
- Shaft Diameter: 0.875
-
Features:
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Nitrogen charged monotube design with internal reservoir
- Increase in strength and heat dissipation when compared to ICON V.S. 2.0 Series shocks
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 6061 aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings and application specific mounting hardware
- 7/8” diameter induction hardened, chrome plated shock shaft
- 100% Rebuildable
- 100% Revalveable
- ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. The larger diameter and oil volume of ICON 2.5 IR Series shocks provide better ride quality and heat dissipation properties than the standard 2.0 Aluminum Series IR Shocks. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDC Valve) shocks.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2021 - Ford F-350 Super Duty | Rear | Extended Cab Pickup |
- Raises Rear 1.75 (in) - 2.75 (in) with Sasquatch Package with Additional Weight Added to Rear End with ICON Rear Coilover Kit Part Number 48610, 48710, 48710C, or 48710E Also Requires Part Number 48201 if upgrading ICON Coilover Equipped with Coil Spring Part Number 148350
- The ICON Heavy Rate Coil Spring Kit is a dual rate coil spring kit that provides extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent performance characteristics.
- 21-23 BRONCO HEAVY RATE REAR COIL KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type: Progressive Dual Rate
- Rear Spring Seat Included: No
- Grade Type: Heavy Duty
- Bump Stops Included: No
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Increased cargo load carrying capacity with less suspension squat
- Unique ICON engineered dual rate coil spring guaranteed for life against sagging and breaking
- Designed for full time large cargo loads
- Retrofits onto existing ICON Bronco rear coilovers
- Semi-gloss black powder coat finish for excellent corrosion resistance
- The ICON Vehicle Dynamics Heavy Rate Rear Coil Spring Kit is a dual rate coil spring kit that provides extra weight capacity for those who frequently load out the rear of their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. The Heavy Rate Coil Spring Kit simply includes the replacement Heavy Rate coil springs used to retrofit existing ICON Rear Coilovers to the Heavy Rate specification. This Heavy Rate Coil Spring Kit is a perfect all-around rear coil spring for those who either keep their Broncos heavily loaded full time, or only for occasional expeditions yet want to maintain the best possible performance across various load-out scenarios with taller ride heights under load compared to the standard ICON triple rate Bronco rear coil springs.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2021 - Ford Bronco | Rear | 2 | Big Bend |
- without Sasquatch Package Raises Rear 2 (in) - 3 (in) with Additional Weight Added to Rear End with ICON Rear Coilover Kit Part Number 48610, 48710, 48710C, or 48710E Also Requires Part Number 48201 if upgrading ICON Coilover Equipped with Coil Spring Part Number 148350
- The ICON Heavy Rate Coil Spring Kit is a dual rate coil spring kit that provides extra weight capacity for those who frequently load out their Broncos with extra gear and equipment while maintaining excellent performance characteristics.
- 21-23 BRONCO HEAVY RATE REAR COIL KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Rear Spring Rate Type: Progressive Dual Rate
- Rear Spring Seat Included: No
- Grade Type: Heavy Duty
- Bump Stops Included: No
- Spring Material: Steel
- California Prop 65 Warning: Yes
- Finish: Powdercoated
-
Features:
- Increased cargo load carrying capacity with less suspension squat
- Unique ICON engineered dual rate coil spring guaranteed for life against sagging and breaking
- Designed for full time large cargo loads
- Retrofits onto existing ICON Bronco rear coilovers
- Semi-gloss black powder coat finish for excellent corrosion resistance
- The ICON Vehicle Dynamics Heavy Rate Rear Coil Spring Kit is a dual rate coil spring kit that provides extra weight capacity for those who frequently load out the rear of their Broncos with extra gear and equipment while maintaining excellent on- and off-road performance characteristics. The Heavy Rate Coil Spring Kit simply includes the replacement Heavy Rate coil springs used to retrofit existing ICON Rear Coilovers to the Heavy Rate specification. This Heavy Rate Coil Spring Kit is a perfect all-around rear coil spring for those who either keep their Broncos heavily loaded full time, or only for occasional expeditions yet want to maintain the best possible performance across various load-out scenarios with taller ride heights under load compared to the standard ICON triple rate Bronco rear coil springs.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2021 - Ford Bronco | Rear | 4 | Badlands |
Showing 1 - 10 of 346 products
Loading...